350軋機生產|圣霖國際(在線咨詢)|350軋機

四棍軋機的工作輥直徑較小，350型號軋機，傳遞軋制力矩，350軋機，軋延壓力由直徑較大的支承輥承受。這類設備的主要優點是相對剛度較大，壓下量大、軋延力小，可軋制較薄的板材，也包括有可逆和連軋兩種。

The working roll diameter of the four bar mill is small， and the rolling torque is transferred. The rolling pressure is borne by the backup roller with larger diameter. The main advantages of this type of equipment are relatively large stiffness， large reduction，350軋機生產， low rolling force，350軋機誰家好， thin rolled sheets， and reversible and continuous rolling two.

軋制技術的有關問題:

般在板邊緣較薄，扎或縱厚度偏差就叫做板凸度。如果板凸度足夠大，板厚偏差可以達到一定值，以至于鋼板不適用于在嚴格要求板厚精度的場合。當厚度偏差增大（在板寬方向上厚度不同）導致在材料設計后產品損失中應考慮增加板厚邊緣。

It is thinner on the edge of the plate， and the deviation of the ligation or longitudinal thickness is called the plate convexity. If the plate convexity is large enough， the thickness deviation of the plate can be reached to a certain value so that the steel plate is not suitable for the situation where the thickness of the plate is strictly required. When the thickness deviation increases (the thickness is different in the width of the plate)， the thickness edge of the plate should be added to the loss of the product after the material is designed.

350軋機生產|圣霖國際(在線咨詢)|350軋機由鞍山市圣霖進出口貿易有限公司提供。350軋機生產|圣霖國際(在線咨詢)|350軋機是鞍山市圣霖進出口貿易有限公司（shenglininternational.cn）今年全新升級推出的，以上圖片僅供參考，請您撥打本頁面或圖片上的聯系電話，索取聯系人：王秋。