推鋼加熱爐廠家優選商家

石油化學工業爐燃料氣與空氣混合物離開火孔速度一般都比較高，都超過其火焰?zhèn)鞑ニ俣?。但是燃燒器在結構上都有相應的措施保證不發生脫火現象，使火焰穩定燃燒。

The mixture of fuel gas and air in the petrochemical furnace is generally higher than that of the flame, which is more than the flame propagation speed. But the structure of the burner has the corresponding measures to ensure that the flame is not degenerated and the flame can be burned steadily.

用于加熱小斷面料坯的爐子只有預熱段和加熱段。

習慣上還按爐內安裝燒嘴的供熱帶劃分爐段，依供熱帶的數目把爐子稱為一段式、二段式，以至五段式、六段式等。50～60年代，由于軋機能力加大，而推鋼式爐的長度受到推鋼長度的限制不能太長。

The furnace used for heating small broken fabric billet is only preheating section and heating section.

It is customary to divide the furnace section according to the heating belt with the burner in the furnace. According to the number of tropics, the furnace is called the one section, the two section, and the five section and the six section. In the 50~60 era, due to the increase of rolling mill capacity, the length of pusher furnace must not be too long due to the length of steel pushing.

加熱爐能快速加熱，氧化和脫碳少，適用于加熱圓形料坯和鋼管。與行星軋機相配合，可用來加熱連鑄板坯；也可對某些鋼材進行局部加熱。缺點是單位爐長的生產能力低，爐子熱效率較低。

The heating furnace can be heated quickly, with less oxidation and decarburization, and is suitable for heating round billets and steel pipes. It can be used for heating continuous casting slab and heating some steel products. The drawback is that the production capacity of unit furnace length is low and furnace thermal efficiency is low.