圣霖聯接機購買服務介紹「多圖」

鍵是一種標準件，通常用于聯接軸與軸上旋轉零件與擺動零件，起周向固定零件的作用以傳遞旋轉運動和扭矩，楔鍵還可以起單向軸向固定零件。而導鍵、滑鍵、花鍵還可用作軸上移動的導向裝置。 根據鍵的結構形式，鍵聯接可分為平鍵聯接、半圓鍵聯接、楔鍵聯接和切向鍵聯接等幾類。

The key is a standard part, which is usually used to connect the rotating parts and swing parts of the shaft and the axle to move the fixed parts to transmit rotary motion and torque, and the wedge key can also play a one-way axial fixation part. The guide, slippery key and the spline can also be used as a guiding device for moving on the axis. According to the structure of the key, key joins can be divided into a flat bond, a semicircle bond, a wedge bond and a tangent bond.

楔鍵聯接：鍵的上下兩表面是工作面，鍵的上表面和輪轂鍵槽底面均有1∶100的斜度，裝配后，鍵即楔緊在軸和輪轂的鍵槽里，工作表面產生很大預緊力。

Wedge key connection: the upper and lower two surfaces of the key are the working faces. The upper surface of the key and the bottom of the hub keyway have 1 to 100 slope. After assembly, the key is wedged tightly in the keyway of the shaft and hub, and the working surface has a large pre tightening force.

花鍵聯接按齒形的不同，可分為矩形花鍵和漸開線花鍵兩類，這兩類花鍵均已標準化。

矩形花鍵的定心方式為小徑定心，即外花鍵和內花鍵的小徑為配合面。其特點是定心精度高，定心的穩定性好，能用磨削的方法消除熱處理引起的變形。

The spline connection can be divided into two types: rectangular spline and involute spline. The two kinds of spline are standardized.

The centering way of the rectangular spline is the small diameter centering, that is, the small diameter of the outer spline and the inner spline is the matching surface. It is characterized by high centering precision and good stability of centering. It can be used to remove the deformation caused by heat treatment by grinding.

凡是在軸轂聯接中不用鍵、花鍵或銷時的聯接，統稱為無鍵聯接。無鍵聯接中我們介紹兩個常用的型面聯接和過盈配合聯接。

The connection of no key, spline or pin in the hub connection is called the keyless connection. In keyless joins, we two commonly used type face joins and interference fit connecti.